Block Series

V40Verdura® 40
Commercial (94lb) block with a wall inclination of .25: 1 used for walls up to 60′ high, and tested for high velocity streambank use.

V50Verdura® 50
Commercial (119lb) block with a wall inclination of .36:1 used for walls up to 60′ high. This block is typically used in combination with the Verdura® 30 for high walls. As a deeper block, Verdura® 60 can be inclined at a flatter angle than Verdura® 40.

V60Verdura® 60
Commercial (144lb) block with a wall inclination of .25:1 used for walls up to 60′ high. This block is used in combination with the Verdura® 40 block for high walls. As a deeper block, Verdura® 60 can be inclined at a flatter angle than Verdura® 40.

V60WVerdura® 60W
Commercial (128lb) block with a wall inclination of .25:1 used for walls up to 60’ high and tested for high velocity stream bank use. Verdura® 60 is intended to be butted up in high velocity flows as rails are set back to allow for a convex curve. The Verdura® 40 block is typically used in the freeboard where full plantability is required.

PosiduraFabricPosi-Dura® Fabric
Nominal 7 inch wide strips of high strength geosynthetic soil reinforcement fabric having integrally woven pockets at regular intervals which can be used with the Posi-Dura® Pipe to construct a positive mechanical connection with Verdura® blocks.

PosiduraPipePosi-Dura® Pipe
Pre-cut lengths of 1-inch diameter schedule 80 pvc pipe used to connect the Verdura® blocks to the Posi-Dura® fabric soil reinforcement.

V10Verdura® 10
Lightweight (22lb) block available through our distributors. Rails on block are set back to allow for a butted up 3′ radius. Applications include: edging, planter beds, and small retaining walls.

V30Verdura® 30
Heavier (68lb) block available through our distributors. Standard designs accommodate single walls up to 6′ high using Posi-Dura® reinforcement where required. Taller walls and tiered geometries can be engineered for specific conditions.